Last Updated : | Wide Angle Software
- How To Open Usb Computer Connection In Android Studio
- How To Open Usb Computer Connection In Android Windows 10
- Android Usb Connection Setting
- Enable Usb Connection On Android
Introduction
As well as connecting your Android device to Droid Transfer over your local WiFi network, you can also connect your Android device to your computer using a USB cable.
To do this - you need to change some of the settings on your Android device so that Droid Transfer and Transfer Companion (running on your Android device) can communicate. This support article shows you how.
Plug the device into your computer, pull down the notification shade, and select the 'USB' option. It may say something like 'USB charging this device' or 'USB for file transfer.' The verbiage may vary slightly depending on your device's Android build and manufacturer, but regardless it will have something about USB. Connect your Samsung phone to PC using a USB cable. In the phone's home screen, use your finger to slide the screen from top to bottom. You have to ensure that the established USB connection is labeled 'Connected as a media device'. If the USB connection is not labeled as indicated, please choose the 'Media device (MTP)' option. Using Windows 1. Plug your Android device into your computer using the USB cable. You can use the same cable that you use to charge. Open the Notification Panel on your Android. Swipe down from the top of the screen to display all of your. Tap the 'USB' option. You'll see this in the list. Connect your device to your PC and wait. If it doesn't show up in file explorer, check to see if Windows is searching for drivers. If it is, allow it to search and install any drivers it needs. This can happen even if you have connected your Android device to your PC under the same connection type.
Enabling Developer Options on your Android Device.
You need to change some settings on your Android device so that 'Developer Mode' is enabled. http://toivzvf.xtgem.com/Blog/__xtblog_entry/19075114-write-1-1-6#xt_blog.
- Open your device settings and choose 'About phone', 'About device' or just 'About'.
- Look for the entry 'Build Number', or 'Build Version'. This entry may be under a further sub-menu called 'Software Information' or 'Software Info' on some devices.
- Tap the 'Build Number' entry five or six times. (No, really!)
Your device will show you how many taps are required to enable Developer Mode. When done your device will have Developer Mode enabled. - Go back to your main Settings menu - scroll down to the bottom, you should see a new entry called 'Developer Options'.
Congratulations! You're now a developer! ;)
Enable USB Debugging.
Just a couple more settings to change.
- Tap to open 'Developer Options'
- Make sure 'Developer Options' is set to ON.
- Scroll down to 'USB Debugging' and make sure that is enabled also. If it isn't, slide the toggle switch to the right to enable it.
- Depending on your Android device - a window may pop up on your phone asking you to verify that you want to enable USB Debugging. Click OK or Apply to allow USB Debugging to become enabled.
Download Transfer Companion to your Android Device.
Download Transfer Companion to your Android device from the Google Play Store. You need to be running at least version 1.58 of Transfer Companion - so check for updates if you have previously downloaded Transfer Companion to your Android device.
How To Open Usb Computer Connection In Android Studio
Download Droid Transfer to your PC.
On your Windows PC, go to this address to download Droid Transfer.
Run Droid Transfer on your PC
Run Droid Transfer on your PC and when you see the connect screen:
Connect your Android device to your PC with a USB cable. Depending on your device, your phone may request permission for it to communicate with your PC.
Click OK or Allow on any prompts showing on your Android Device.
When Droid Transfer detects your device, it will launch Transfer Companion on your Android device and begin to load your phones data through the USB cable.
Connection should now made between Droid Transfer and Transfer Companion and you can start managing and copying your Android Phone content using Droid Transfer on your PC.
If you're having troubles, check out our USB connection troubleshooting tips which will help you resolve any issues.
Nowadays, people are obsessed with Android smartphones. people spend time tweaking with their Android on many occasions including a walk with it, sit with it, eat with it and toilet with it. It sounds to be exaggerated, but the fact is that we use smartphones to take a selfie, listen to music, watch videos, play games and etc. Carlsbro eclipse 12 manual. By accessing Android from PC, you can manage the files stored on your phone more efficiently. But how? Just plug the USB cable in the computer? Definitely not. Here are three ways to help you get this done. How to merge clips in imovie iphone.
However, you may have learned about USB debug mode on your phone which is the most common means to connect to computer. USB debug mode is a function for Android developers in the early times which allows them to control Android through the PC. Android has open-source code, which means users can freely access to open USB debug mode whenever they want now. You can activate the USB debug mode by using a cable, let's check for it in the first method.
Access Android phone from PC in three ways
Method One: Recommended Method to Access
The first way is to access Android files from PC via USB cable without other tools is by using ApowerManager. It is a one-stop management tool that allows you to access Android from PC so that you can manage phone pictures, music, videos, apps, etc. Follow the guide below to learn how to operate.
- Download and install.
- Open the USB debug mode and plug the USB cable in the computer. Remember to change the USB connection mode to MTP or PTP. At this time, a prompt will pop up at the lower right corner of your computer saying 'Installing device driver software'. Wait until the installation finishes.
- Launch the phone manager to connect your Android to your PC. Then you can access Android files from PC.
Did you know? ApowerManager not only can access Android from PC via USB cable but also via Wi-Fi. For Wi-Fi connection, you should install an app on your Android first. Then you can scan the QR code or enter the verification code to build a connection. Moreover, as it is a one-stop management tool, it possesses lots of management functions, like contacts, messages, screenshots, backup and restores.
Pros: One-stop management. Fast connecting speed. Support various kinds of Android phones. A simple interface and easy operation.
Cons: The trial version only available for three days.
Method two:Method two: Access through Official Phone Driver
The second method is using the phone driver which the smartphone enterprise or Third-party provides, such as Samsung and HTC driver. The driver will help you access files on Android from PC. Here I take Samsung Kies and HTC Sync Manager as examples to talk through the instructions.
- Samsung Kies
1. Visit Samsung official website to download Kies.
2. Install and launch it
3. Open the USB debug mode of your phone and then plug in the USB cable to access Android phone from PC.
- HTC Sync Manager
1. Navigate to the official website of HTC, find the mobile driver and download it. The driver would be in the Support Center.
2. Install it and then launch the driver.
3. Open USB debug mode on your Android. Plug in the USB cable to access Android from PC.
Pro: Provide professional service to a certain kind of Android phone.
Cons: Complicated to use. Slow connecting speed.
As you can see, there're special drivers for corresponding models. But you have to install two drivers for transferring files between two Android devices in different brands. Some of the drivers are glitchy, it occurs to me that the connection sometimes fails due to unknown reasons.
Method Three: Access without Assistant Tools
First, open the USB debug mode and plug in the USB cable.
Method two:Method two: Access through Official Phone Driver
The second method is using the phone driver which the smartphone enterprise or Third-party provides, such as Samsung and HTC driver. The driver will help you access files on Android from PC. Here I take Samsung Kies and HTC Sync Manager as examples to talk through the instructions.
- Samsung Kies
1. Visit Samsung official website to download Kies.
2. Install and launch it
3. Open the USB debug mode of your phone and then plug in the USB cable to access Android phone from PC.
- HTC Sync Manager
1. Navigate to the official website of HTC, find the mobile driver and download it. The driver would be in the Support Center.
2. Install it and then launch the driver.
3. Open USB debug mode on your Android. Plug in the USB cable to access Android from PC.
Pro: Provide professional service to a certain kind of Android phone.
Cons: Complicated to use. Slow connecting speed.
As you can see, there're special drivers for corresponding models. But you have to install two drivers for transferring files between two Android devices in different brands. Some of the drivers are glitchy, it occurs to me that the connection sometimes fails due to unknown reasons.
Method Three: Access without Assistant Tools
First, open the USB debug mode and plug in the USB cable.
- If you want to manage files in the SD card, change the connection mode to USB storage.
- If you want to manage the files in the internal memory, switch the connection mode to PTP.
Second, after successfully connecting, you will find your Android device appears as a portable device in 'My computer'.
How To Open Usb Computer Connection In Android Windows 10
Pros: Access Android device from PC without installing any software.
Cons: You cannot preview the files or to manage them efficiently like working with a software. Sometimes, it is hard for some Android phones to connect to PC.
Android Usb Connection Setting
Comparing with three methods above, the method of using Apowersoft Phone Manager is highly recommended. The reason is that the phone driver only compatible to certain kind of Android phones and the second method cannot access to the Android files in the internal memory and SD card at the same time.
Enable Usb Connection On Android
Related posts:
